Sat-Thu: 8AM-6PM
© 2026 Hatoon Machinery. All rights reserved.
Serving Saudi Arabia with premium construction equipment since 1999.
Powered By Erratum Solutions
Preventing mud, clay, and heavy sediment track-out onto public roadways from active construction sites, open-cast mines, quarries, and industrial facilities requires a high-volume, automated cleaning mechanism. Heavy Vehicle & Wheel Wash Systems deliver fully automated drive-through tyre, dual-wheel gap, and chassis washing to contain site soil within project boundaries. Supplied across Saudi Arabia by Hatoon Machinery, these industrial wheel wash stations provide project managers, contractors, and site engineers in Riyadh, Jeddah, Dammam, and regional developments with reliable environmental compliance and continuous traffic throughput.
Built with high-tensile structural steel drive-through platforms, heavy-duty side spray bars, and integrated bottom wash grates, these systems blast away impacted mud and dirt using high-pressure targeted water jets in just 15 to 30 seconds per vehicle. Equipped with automated optical drive-through sensors, severe-duty water pumps, and closed-loop settling tanks with automated sludge chain scrapers, Heavy Vehicle & Wheel Wash Systems recycle up to 85% of wash water for continuous reuse. Available in surface-mounted modular configurations with temporary ramps or flush-to-grade shallow-pit installations, these units process up to 120 trucks per hour without slowing exit gate operations.
| Application Sector | Site Challenges | Wheel Wash Performance Solution |
|---|---|---|
| Construction & Mega Projects | Heavy mud and dirt track-out onto public roads leading to municipal fines and road hazards. | Automated drive-through wash platforms clean tyres and undercarriages thoroughly in under 30 seconds. |
| Mining, Quarries & Aggregates | Deep clay and packed mud trapped between dual rear tires on heavy haul trucks. | High-impact side bar jets and bottom spray nozzles blast away stubborn compacted soil before highway entry. |
| Concrete & Batching Plants | Wet cement slurry, aggregate dust, and sticky residue accumulating on mixer truck chassis. | Continuous high-flow wash cycles clear wet concrete residue, preserving truck aesthetics and road safety. |
| Ports, Logistics & Waste Yards | Corrosive soil, chemical mud, and organic residue leaving site exit gates. | Sealed recycling tanks and automated sludge scraper conveyors manage heavy continuous wash solids automatically. |
Automated Drive-Through Efficiency: Optical entrance sensors trigger high-pressure spray bars automatically as vehicles drive through at low speeds, cleaning up to 120 trucks per hour with zero manual hose labor.
85% Closed-Loop Water Recycling: Integrated multi-stage settling tanks continuously filter wash water and discharge heavy sludge via automated chain scrapers, drastically reducing fresh water consumption on arid sites.
Rapid Modular Installation: Surface-mounted models feature temporary steel ramps and drop-in platform modules that require minimal site preparation and can be easily relocated between job phases.
Desert-Grade Structural Durability: Heavy-gauge galvanized or epoxy-coated structural steel platforms, IP65 weather-sealed control panels, and heat-resistant pumps ensure continuous operation under extreme Saudi ambient heat.
KSA Compliance & Technical Support: Hatoon Machinery provides full site layout guidance, complete unit supply, replacement spray bars, spare pumps, and SASO/SABER documentation support across Saudi Arabia.
The BY-01 Grating-Type Automated Wheel Washer is a high-volume drive-through tire and chassis cleaning platform designed to eliminate mud, clay, and soil track-out from active job sites. Featuring heavy-duty floor grates and targeted multi-directional spray bars, this unit solves the critical problem of site exit mud contamination on public roads, protecting project developers from municipal compliance fines and road safety hazards. As trucks drive slowly over the grated washing deck, high-impact water jets blast away packed debris from tread grooves, dual-wheel gaps, and undercarriages, ensuring vehicles exit fully cleaned in under 30 seconds. Built for heavy-duty operational demands across Saudi Arabia, including urban construction developments, quarry exits, concrete batching plants, and excavation sites in Riyadh, Jeddah, Dammam, and regional hubs, the BY-01 maximizes traffic throughput while recycling site water. The open steel grating design allows heavy mud and gravel to drop directly into an integrated settling basin equipped with automated sludge removal, enabling efficient closed-loop water reuse. Outfitted with desert-grade IP65 electrical enclosures, high-pressure pumps, and anti-corrosive structural coatings, the system delivers continuous, automated site performance under severe heat and sand conditions.
The BY-01 Surface-Mounted Wheel Washer with Ramps is an agile, drive-through tire and chassis washing system engineered for rapid deployment without deep ground excavation. Equipped with heavy-duty steel entry and exit ramps, this system solves the challenge of site-exit mud track-out on temporary construction zones, rental yards, and fast-moving civil works where civil foundation work is unfeasible. As heavy haulers and mixer trucks ascend the platform, high-pressure water jets from side spray bars and bottom grates dislodge packed clay, gravel, and mud from tire treads and undercarriages within 15 to 30 seconds. Tailored for fast-paced infrastructure projects, quarry roads, and commercial developments across Riyadh, Jeddah, Dammam, and major industrial sectors in Saudi Arabia, the BY-01 Ramp system delivers continuous environmental compliance with high water efficiency. The surface-mounted design drains used wash water directly into an adjacent closed-loop settling tank, clarifying solids for up to 85% water reuse and eliminating runoff hazards. Built with a heavy-gauge structural steel frame, weather-sealed IP65 electrical controls, and corrosion-resistant coatings, it ensures reliable automated performance under extreme Middle Eastern heat and abrasive site conditions.
The BY-01 Double-Length Surface-Mounted Wheel Washer is an extended drive-through cleaning platform designed for high-traffic job sites and heavy-duty vehicles with multi-axle configurations. By doubling the wash deck length, this unit solves the problem of persistent, deeply embedded mud and clay on long multi-axle tippers and heavy haulers that standard single-platform washers cannot clean in a single pass. As trucks traverse the lengthened grated deck, extended side spray manifolds and bottom jet arrays deliver twice the dwell time and wash coverage, completely stripping stubborn soil from tire treads, dual-wheel gaps, and chassis assemblies before vehicles enter public roads. Engineered for demanding civil infrastructure, large-scale mining operations, mega construction projects, and aggregate processing plants across Riyadh, Jeddah, Dammam, and major industrial regions in Saudi Arabia, the BY-01 Double Type maintains smooth site exit flow without traffic bottlenecks. Equipped with surface-mounted steel approach ramps, it installs without deep pit excavation and integrates directly with a heavy-duty closed-loop water recycling system for continuous water filtration and reuse. Its heavy-gauge structural steel construction, IP65-rated weather-sealed controls, and heat-resistant pump assemblies guarantee reliable, continuous operation in severe desert heat and high-dust environments.
The BY-02 Heavy-Duty Platform Wheel Washer by Benyuan is a high-capacity drive-through cleaning system designed to handle continuous heavy vehicle traffic at busy site exit gates. Featuring an elevated structural steel washing platform with integrated high-impact spray manifolds, this unit solves the problem of severe mud and soil track-out caused by fully loaded dump trucks, concrete mixers, and heavy haulers. As vehicles traverse the platform, targeted water streams from floor-mounted nozzles and side spray walls blast away compacted dirt, clay, and gravel from tire treads, dual-wheel gaps, and undercarriages within seconds. Built for high-volume operational environments across Saudi Arabia, including mega infrastructure projects, mining haul exits, quarry operations, and commercial construction yards in Riyadh, Jeddah, Dammam, and regional hubs, the BY-02 ensures uninterrupted site logistics and strict environmental compliance. The heavy-duty platform design directs dirty wash water into an integrated closed-loop settling basin, where solids are separated to allow high-efficiency water recirculation. Constructed with heavy-gauge anti-corrosive steel, IP65-sealed weather-proof controls, and severe-duty pumps, it delivers reliable, automated performance under harsh desert conditions.
