Sat-Thu: 8AM-6PM
© 2026 Hatoon Machinery. All rights reserved.
Serving Saudi Arabia with premium construction equipment since 1999.
Powered By Erratum Solutions
The BY-04 Intelligent Robotic Arm Washing System by Benyuan is a state-of-the-art, fully automated heavy vehicle wash station engineered specifically for ultra-class mining trucks, heavy haulers, and specialized ETTC equipment. Utilizing advanced high-precision 3D laser scanning and AI modeling sensors, this system solves the complex challenge of cleaning irregular, heavily caked mud and mineral buildup from intricate mining chassis, suspension articulators, and wheel assemblies. As a mining vehicle enters the washing bay, 3D vision sensors rapidly construct a digital spatial model of the truck's exact dimensions and contours, programming the multi-axis robotic arms to dynamically articulate high-pressure water monitors within optimal cleaning distance without risk of vehicle collision.
Engineered for extreme-duty mining operations, quarry complexes, and large-scale extraction sites across Riyadh, Jeddah, Dammam, and major mineral zones in Saudi Arabia, the BY-04 eliminates high-risk manual pressure washing while drastically cutting wash cycle times. High-impact robotic spray nozzles deliver targeted hydro-demolition force to dislodge compacted ore, clay, and mud from hard-to-reach undercarriage linkages, dual-wheel voids, and dump body undersides. Integrated with a heavy-duty closed-loop water treatment plant, IP67-rated robotic arm enclosures, and desert-ready climate controls, it ensures continuous, high-efficiency fleet maintenance under extreme ambient heat and harsh abrasive dust conditions.
The BY-01 Grating-Type Automated Wheel Washer is a high-volume drive-through tire and chassis cleaning platform designed to eliminate mud, clay, and soil track-out from active job sites. Featuring heavy-duty floor grates and targeted multi-directional spray bars, this unit solves the critical problem of site exit mud contamination on public roads, protecting project developers from municipal compliance fines and road safety hazards. As trucks drive slowly over the grated washing deck, high-impact water jets blast away packed debris from tread grooves, dual-wheel gaps, and undercarriages, ensuring vehicles exit fully cleaned in under 30 seconds. Built for heavy-duty operational demands across Saudi Arabia, including urban construction developments, quarry exits, concrete batching plants, and excavation sites in Riyadh, Jeddah, Dammam, and regional hubs, the BY-01 maximizes traffic throughput while recycling site water. The open steel grating design allows heavy mud and gravel to drop directly into an integrated settling basin equipped with automated sludge removal, enabling efficient closed-loop water reuse. Outfitted with desert-grade IP65 electrical enclosures, high-pressure pumps, and anti-corrosive structural coatings, the system delivers continuous, automated site performance under severe heat and sand conditions.
The BY-01 Surface-Mounted Wheel Washer with Ramps is an agile, drive-through tire and chassis washing system engineered for rapid deployment without deep ground excavation. Equipped with heavy-duty steel entry and exit ramps, this system solves the challenge of site-exit mud track-out on temporary construction zones, rental yards, and fast-moving civil works where civil foundation work is unfeasible. As heavy haulers and mixer trucks ascend the platform, high-pressure water jets from side spray bars and bottom grates dislodge packed clay, gravel, and mud from tire treads and undercarriages within 15 to 30 seconds. Tailored for fast-paced infrastructure projects, quarry roads, and commercial developments across Riyadh, Jeddah, Dammam, and major industrial sectors in Saudi Arabia, the BY-01 Ramp system delivers continuous environmental compliance with high water efficiency. The surface-mounted design drains used wash water directly into an adjacent closed-loop settling tank, clarifying solids for up to 85% water reuse and eliminating runoff hazards. Built with a heavy-gauge structural steel frame, weather-sealed IP65 electrical controls, and corrosion-resistant coatings, it ensures reliable automated performance under extreme Middle Eastern heat and abrasive site conditions.
The BY-01 Double-Length Surface-Mounted Wheel Washer is an extended drive-through cleaning platform designed for high-traffic job sites and heavy-duty vehicles with multi-axle configurations. By doubling the wash deck length, this unit solves the problem of persistent, deeply embedded mud and clay on long multi-axle tippers and heavy haulers that standard single-platform washers cannot clean in a single pass. As trucks traverse the lengthened grated deck, extended side spray manifolds and bottom jet arrays deliver twice the dwell time and wash coverage, completely stripping stubborn soil from tire treads, dual-wheel gaps, and chassis assemblies before vehicles enter public roads. Engineered for demanding civil infrastructure, large-scale mining operations, mega construction projects, and aggregate processing plants across Riyadh, Jeddah, Dammam, and major industrial regions in Saudi Arabia, the BY-01 Double Type maintains smooth site exit flow without traffic bottlenecks. Equipped with surface-mounted steel approach ramps, it installs without deep pit excavation and integrates directly with a heavy-duty closed-loop water recycling system for continuous water filtration and reuse. Its heavy-gauge structural steel construction, IP65-rated weather-sealed controls, and heat-resistant pump assemblies guarantee reliable, continuous operation in severe desert heat and high-dust environments.
