© 2026 Hatoon Premium Machinery. All rights reserved.
Serving Saudi Arabia with premium construction equipment since 1999.
Powered By Erratum Solutions

Price: 10,000 SAR
The VTS WDW Series (500N–5kN) is a high-precision, table-top electromechanical UTM engineered for the delicate analysis of non-metal materials. Ideal for Saudi industrial labs, this single-column system provides surgical accuracy for testing plastic films, rubber, paper, foam, and fine wires.
Designed for versatile QC, it supports tensile, compression, shearing, and 180°/90° peeling tests. Fully ISO/ASTM compliant, the WDW-0.5 to WDW-5 models integrate seamlessly into Vision 2030 projects in Riyadh and NEOM, offering the computerized data reliability required for advanced structural verification and material R&D.
| Specification | WDW Series (WDW-0.5 / WDW-1 / WDW-2 / WDW-5) |
|---|---|
| Force Range (kN) | 0.01–0.5 / 0.02–1 / 0.04–2 / 0.10–5 |
| Force Accuracy | ±1% of applied force |
| Position Resolution (mm) | 0.001 |
| Test Speed Range | 0.005–500 mm/min (servo control) |
| Crosshead Travel (mm) | 800 |
| Power Requirement | 1-phase, 220V±10%, 50Hz or 110V, 60Hz |
| Environmental Requirements | Room temperature ≤ 40°C, Relative humidity < 80% |
| Frame Dimension (mm) | 600 × 420 × 1700 |

The WDW-10 Universal Testing Machine represents a significant step up in structural rigidity. Unlike single-column units, the dual-column table-top design provides the lateral stability required for higher-force testing of plastics, wood, textiles, and light metal components. Engineered by Jinan Victory Instrument (VTS), this 10kN system is the preferred choice for Saudi laboratories demanding high-volume testing with consistent accuracy. - Dual-Column Rigidity: Enhanced frame stiffness ensures minimal deformation during high-load tests. - Precision Servo Drive: High-response motor control for accurate test speeds and repeatable results. - Smart Analytics: Advanced VTS software provides real-time data acquisition and automatic report generation in compliance with international standards. - Versatile Testing: Optimized for tensile, compression, and flexural (3-point bend) testing.
Price: 12,000 SAR

The VTS Floor-Standing UTM (50kN-600kN) is a heavy-duty electromechanical system built for high-force structural testing. Engineered for Saudi Arabia’s steel and construction sectors, this dual-column powerhouse ensures ISO/ASTM compliant analysis of metals and composites. Ideal for Riyadh and NEOM labs, it delivers the rigidity and precision needed for massive load verification.
Price: 150,000 SAR

The VTS Floor-Standing UTM (200kN-600kN) is built for the "big stuff"—high-strength rebar, structural steel, and industrial alloys. Engineered for the heavy demands of Saudi Arabia’s construction sector, its reinforced frame ensures surgical precision even at 60 tons of force. It provides the unshakeable reliability required for Riyadh and NEOM’s most critical giga-projects.
Price: 75,000 SAR